PREMIER TANK CORPORATION PUBLIC COMPANY LIMITEDSET: PTC🇹🇭 TH

Business Operation · 2025

Corporate Information

Company Name

PREMIER TANK CORPORATION PUBLIC COMPANY LIMITED

Telephone

0-2318-4013

Website

www.premiertankcorp.com

Email

kullanit.s@premiertankcorp.com

Dividend Policy

Dividend Policy

The Company intends to conduct its business based on the principles of good corporate governance, transparency, and accountability, taking into account the interests of stakeholders and recognizing the rights of shareholders as both investors and owners of the Company. Therefore, to enhance long-term shareholder value, the Company has established the dividend payment policy for the Company and its subsidiaries as follows:

Company's Dividend Payment Policy

In the event that the Company has a net profit, dividends shall be paid at a rate of not less than 40 percent of the net profit from the separate financial statements after deducting corporate income tax and all types of reserves, as stipulated by law and the Company's regulations. However, dividend payments shall not exceed the retained earnings in the separate financial statements, and in the event that the separate financial statements show accumulated losses, the Company will not consider paying dividends.

Nevertheless, the Company may consider setting a dividend payment rate lower than that specified above, depending on the Company's operating results, financial position, and liquidity, as well as the necessity for working capital in operations, the Company's future business expansion plans, and other factors related to the Company's management, as deemed appropriate by the Board of Directors.

Dividend payments must be approved by the shareholders' meeting, except for interim dividend payments which the Board of Directors may approve from time to time when it deems that the Company has sufficient profit to pay dividends. Such interim dividend payments shall be reported to the shareholders' meeting at the next shareholders' meeting.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescriptionRemark
0.020.110.180.210.33Net profit per share (Baht : Share)Net profit per share (baht : share)
0.010.050.080.080.1Dividend per share (Baht : Share)Dividend per share (baht : share)
The Board of Directors resolved to submit the matter for consideration and approval at the General Meeting of Shareholders, which will be held on April 24, 2026.
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
0.010.050.080.080.1Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
53.8940.9840.9440.1641.88Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)
The dividend payout rate is determined by policy, calculated from the net profit of the separate financial statements, and considers the dividends paid for the operating results of that fiscal year.

Major Shareholders

Major Shareholders

No.NameShares% Shares
21,432Prime Gain Holding Co., Ltd.104,996,00025.61
21,433Mr. Thaweewat Burapapattanapong54,000,00013.17
21,434Growider Capital Company Limited15,000,0003.66
21,435C4 Corporation Co., Ltd.14,993,0003.66
21,436Mrs. Suda-Orn Burapapattanapong12,000,0002.93
21,437Mr. Thalengkiat Phattharapisitphong10,000,0002.44
21,438Mr. Atthapol Sittipongtanakul9,250,0002.26
21,439Miss Weeraya Burapapattanapong8,794,0002.14
21,440Mr. Weeraphon Burapapattanapong7,930,0001.93
21,441Mr. Weerawat Burapapattanapong7,930,0001.93
21,442Mr. Pongsa Siripreechapong4,947,8001.21
21,443Miss Warunee Hengarunprasarn4,910,0001.2
21,444Mr. Chusak Amornphairoj3,353,8000.82
21,445Mrs. Manee Amornkul3,187,2000.78
21,446Thai NVDR Company Limited3,154,7050.77
21,447Mr. Kriangsak Tiawsirisup3,100,0000.76
21,448Mr. Winit Hongniphon3,001,0000.73
21,449Miss Pattaraporn Luemsamran3,000,0000.73
21,450Mr. Pitichai Denpruktham2,675,2000.65

Business Strategies Overview

Chairman's Message

For the year 2025, our company was affected by external factors that presented both challenges and opportunities, strengthening our business operations and enabling us to navigate through the year. The Thai economy faced pressure from external factors, including global economic volatility and rising energy prices. Concurrently, domestic factors, particularly households, continued to grapple with increased living costs and debt burdens, leading to a limited recovery in purchasing power. Nevertheless, the company remains committed to continuing its oil storage business, as well as developing infrastructure for new businesses in line with its vision under the operations of its subsidiaries, to ensure continuous organizational growth, achieve set goals, drive the organization towards sustainability, and create balance throughout the business value chain across environmental, social, and governance (ESG) aspects. The Board of Directors and management have closely monitored various changing situations, adjusted strategies, and conducted business with prudence and caution to align with the evolving business environment.


Additionally, the Board of Directors places importance on good corporate governance. The company received a 5-star rating, or 'Excellent' (Excellent GC Scoring), in the Corporate Governance Report of Thai Listed Companies (CGR) for 2025, organized by the Thai Institute of Directors (IOD) with the support of the Stock Exchange of Thailand and the Securities and Exchange Commission (SEC), and achieved a perfect score of 100 (5 badges) for the third consecutive year in the Quality Assessment of the Annual General Meeting of Shareholders (AGM Checklist) for 2025, conducted by the Thai Investors Association and the Federation of Thai Capital Market Organizations, as well as the implementation of aspects of anti-corruption and bribery. The company is in the process of applying for certification under the Collective Action Coalition Against Corruption (CAC) program, which reflects the emphasis on good corporate governance under the principles of corporate governance, and the commitment to developing the efficiency of meetings for shareholders and all stakeholders, thereby contributing to the organization's growth and sustainable business operations.


The Board of Directors extends its gratitude to all patrons, stakeholders, and relevant parties for their continuous support of the company. We assure you of our unwavering commitment to conducting business with ethical principles and good corporate governance practices, and to contributing to the sustainable development and growth of the economy and the nation.

Vision

Vision

“Be a stable and strong value chain in national infrastructure, utilizing sustainable and responsible management practices to Society and Environment and top choice for customers as a business partner.”



Mission

"Develop infrastructure and services that are safely, efficient, and effective to meet customers' needs, with high-quality standards.”

Objectives

To achieve results according to our vision and mission. is to create excellence in various areas, for Asset & location excellence Operational excellence Service excellence Technological excellence and People excellence.

Goals

• Increase efficiency in fuel receiving and distribution by implementing various storage and transfer methods, and expanding the number of service stations that receive oil from our depots.

• Develop energy infrastructure and utilities so that all areas have equal access opportunitie

• Create new business opportunities that align with our vision and mission in order to diversify our income sources and reduce the risk of relying solely on one business.


In alignment with this objective, the company will remain transparent and comply with all relevant laws, regulations, and guidelines. However, any new business opportunities that the company undertakes must not create conflicts of interest unless appropriate measures are in place to ensure that the management of these ventures is in the best interest of the company and its shareholders as a whole.

Business Strategies

The company is dedicated to enhancing the oil industry in Thailand by excelling in the following areas:

1. Building a service base in a prime location (Asset & Location Excellence)

The company achieves location excellence by carefully selecting prime locations to build terminals, which act as strategic points for connecting the oil transportation system and as an efficient center for oil distribution in the northeastern region. These prime locations provide convenient transit and cost-effective solutions for our customers.

2. Creating Operational Excellence

The company achieves operational excellence by effectively managing the process of receiving, storing, mixing, and dispensing fuel, ensuring they meet international safety standards while also providing cost-effective services.

3. Creating Service Excellence

We believe that keeping our customers satisfied is crucial to our success. We are continuously seeking ways to improve and create new services, and we take customer feedback seriously. We are dedicated to constantly evolving and adapting to meet the needs of our customers, now and in the future.

4. Creating Technological Excellence

Our company is committed to leveraging technology to enhance our services. By incorporating digital devices and automated inventory management tools, we are able to streamline our processes and improve efficiency.

5. Building a Team of Excellence (People Excellence)

At our company, we take pride in fostering a strong team culture. We have a skilled and experienced management and operational team that is comprised of individuals with diverse backgrounds and expertise. By instilling our organizational values in our personnel and aligning them in the same direction, we are able to work collaboratively and efficiently, which helps us to constantly improve and grow.

Material Changes & Developments

Material Changes & Developments

YearDescription
2,021
  • In April, the 2021 Annual General Meeting of Shareholders approved the plan to register the Company on the Market for Alternative Investment (MAI) with the following resolutions:

1) Approved the allocation of 110,000,000 newly issued ordinary shares of the Company at a par value of 0.50 baht per share for the initial public offering ( IPO) representing 26.83 percent of the total paid-up capital after the IPO.

2) Approved the listing of the Company's ordinary shares as listed securities on the Market for Alternative Investment (MAI).

  • In August, the Company filed a registration statement and draft prospectus (Filing) for the initial public offering (IPO) of the newly issued ordinary shares.


2,022
  • In February, the Company was listed on the MAI market and opened for trading on February 15, 2022.

2,023
  • The 2023 Annual General Meeting of Shareholders of Premier Tank Corporation Public Company Limited was held on Friday, April 21, 2023 vote to approve the change in the objectives of the capital increase from the IPO for the first time (IPO).

  • The Board of Directors Meeting No. 5/2023 held on 15 December 2023, the Board passed the resolution to approve the establishment of a new subsidiary company. For produce, procure, and sell tap water filtration systems for household consumption. Premier Tank Corporation Public Company Limited holds the shares in the ratio 79.9999 %


2,024
  • On January 19, 2024, The Company registered a subsidiary company with the Department of Business Development, Ministry of Commerce. The subsidiary uses the name Hydro Genius Company Limited. It has a registered capital of 10.00 million baht, comprising 1,000,000 ordinary shares with a par value of 10 baht per share. The Company holds 79.99 percent of the shares in this subsidiary company.

  • In March 2024, the Company signed a declaration of intent to join the Thai Private Sector Collective Action Against Corruption (CAC).

  • In September 2024, the Company signed a service contract between Khon Kaen Oil Terminal and PTT Oil and Retail Business Public Company Limited.

2,025
  • On April 30, 2025, the service contract for the Sisaket oil depot concluded. The company will continue to operate its business as usual, despite the non-renewal of the aforementioned contract. The services provided by the Sisaket oil depot represent 21% of the total oil distribution and do not impact the company's cash flow.

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

Yes

Offerings

Type of SecuritiesAmount Raised Given AsAmount Raised (Million Baht)Uses of the MoneyUsed as Declared?Progress / Reasons and Measures if Not Used as Declared
Equity Instruments2873368.362022-12-31 · Objective: To repay debt to financial institutions · Period type: 2869 · Start period: 2022-02-15 · Spent amount type: 2873 · Start spent amount: 120.0 · Expected amount type: 2873 · Start expected amount range: 120.0 · 2026-12-31 · Objective: Invest in new business related to the vision and mission in the development of energy and public utilities infrastructure, such as the municipal waste-to-energy power project business and the business of produce, procure, and sell tap water filtration systems for household consumption. · Period type: 2869 · Start period: 2025-01-01 · Spent amount type: 2873 · Start spent amount: 8.0 · Expected amount type: 2873 · Start expected amount range: 248.36Y

Premier Tank Corporation Public Company Limited (“The Company”), the initial public offering (IPO) of 110,000,000 shares during February 4 - 8,2022 at the price of Baht 3.50 per share and the company received proceeds, after deducting expenses related to the offering of such capital increase share, in the total amount of Baht 368.36 million. Subsequently, on April 21, 2023, the 2023 Annual General Meeting of Shareholders resolved to approve the change in the purpose of utilizing proceeds from the IPO, which is a significant change in the purpose of utilization. The details are as disclosed to the Stock Exchange of Thailand on April 21, 2023.

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

Yes

Commitments and How They Were Met

In August 24, 2021, the company filed a registration statement and draft prospectus for its initial public offering. In February 3, 2022, the company was successfully listed. The company fully complied with regulations set by the Office of the Securities and Exchange Commission and had no outstanding obligations or conditions.

Group Operating-Structure Policy

Description

The Company has a policy for supervising the operations of its subsidiaries and associated companies. Therefore, the nomination and exercise of voting rights for appointing individuals as directors in subsidiaries and associated companies must first be approved by the Company's Board of Directors. Individuals appointed as directors in subsidiaries or associated companies are responsible for acting in the best interests of those respective subsidiaries or associated companies (not solely for the best interests of the Company). Furthermore, the Company stipulates that such appointed individuals must obtain approval from the Company's Board of Directors before casting votes or exercising voting rights on significant matters of the subsidiaries and associated companies, which are of the same level of importance as matters that would require approval from the Company's Board of Directors if undertaken by the Company itself. The appointment of representatives as directors in such subsidiaries and associated companies shall be in accordance with the Company's shareholding proportion and/or the shareholders' agreement in such subsidiaries and associated companies.


Furthermore, in the case of a subsidiary, the Company requires that the person appointed by the Company must ensure that the subsidiary conducts its operations regarding connected transactions, the acquisition or disposal of assets, or any other significant transactions of such subsidiary fully and correctly in accordance with the criteria of the Securities and Exchange Commission and/or the Stock Exchange of Thailand, and applies the criteria related to disclosure and the aforementioned transactions in the same manner as the Company's criteria. This also includes overseeing the collection and recording of the subsidiary's accounting data, enabling the Company to inspect and compile it to prepare consolidated financial statements promptly as required by the Stock Exchange of Thailand.

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressProvinceZip CodeTelephoneBusiness TypeSecurity TypeSharesPaid-up Shares
Hydrogenius Limited2034/69-70 Italthai Tower, 15th Floor, Phetchaburi Tat Mai Road, Bang Kapi Sub-district, Huai Khwang DistrictBangkok10310+066-2134-4013Manufacture, procure, and distribute tap water filtration systems for domestic and potable use.Common shares799,999799,999

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

Yes

Description

Non-compete agreement

Currently, the company's major shareholders, the Burapapatthanapong family, are engaged in businesses related to the energy sector, specifically oil transportation and gas stations. However, these businesses do not have a significant competitive or interdependent business relationship with the company's operations.

Shareholders' Agreement

Agreement Exists (Y/N)

Yes

Description

To prevent potential conflicts of interest that may arise in the future, to protect shareholders' rights, and to treat shareholders fairly, the Burapapattanapong family, consisting of Mr. Taweewat, Ms. Sudaorn, Mr. Veerawat, Mr. Veerapol, and Ms. Veeraya, has entered into an agreement with the Company not to engage in businesses of the same type as the Company and its subsidiaries (if any), or become a partner in a company, or an ordinary partnership, or a partner with unlimited liability in a limited partnership, or serve as a director, employee, or controlling person in any business that operates in the same nature and competes with the business of the Company and its subsidiaries (if any), whether for their own benefit or the benefit of others. Should the major shareholders identify such business opportunities in the future, they shall consider allowing the Company and its subsidiaries (if any) to undertake those businesses. This agreement shall remain binding until Mr. Thaweewat, Ms. Suda-Orn, Mr. Weerawat, Mr. Weeraphon, and Ms. Weeraya, along with their related persons as defined by the Notification of the Securities and Exchange Commission No. Kor Jor 17/2551, collectively hold less than 10.00% of the Company's paid-up registered capital and do not hold positions as executives or directors of the Company.

Shareholding Diagram (Group Structure)

Does the company hold shares in other companies?

Yes

Subsidiaries

Company NameJuristic Persons / Holders
Hydro Genius Company LimitedPREMIER TANK CORPORATION PUBLIC COMPANY LIMITED · Voting rights percent: 79.99 · Shareholding proportion percent: 79.99

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations85,980.15100148,245.31100183,638.69100
Service income50,516.2158.75109,410.6173.8146,742.5579.91
Rental income27,54032.0330,37520.4931,32017.06
Other income540.340.63381.850.26689.360.38
Financial income 7,383.68.598,077.855.454,886.782.66
OtherOthers000000

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue85,980.15100148,245.31100183,638.69100
DomesticDomestic85,980.15100148,245.31100183,638.69100
InternationalInternational000000

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 540.34 · Description: Total other income · As of yesteryear: 381.85 · As of year before yesteryear: 689.36 · 1711 · As of year: 274.67 · Description: Other income from operations · As of yesteryear: 302.38 · As of year before yesteryear: 378.581712 · As of year: 265.67 · Description: Other income not from operations · As of yesteryear: 79.47 · As of year before yesteryear: 310.781713 · As of year: 0.0 · Description: Share of profit · As of yesteryear: 0.0 · As of year before yesteryear: 0.0

Product / Service Characteristics

Introduction

The Premier Tank Corporation Public Company Limited (“Company”) has been granted authorization by the Department of Energy Business, Ministry of Energy, to operate as a fuel depot operator under Section 17 of the Fuel Control Act B.E. 2542. This authorization allows the Company to carry out fuel depot operations, including receiving, storing, blending, and dispensing fuel products.

1) The Khon Kaen (“Khon Kaen Depot”) and Sisaket (“Sisaket Depot”) provide services for the receipt, storage, and dispensing of gasoline and diesel fuel products.

2) The Company provides a blending service for base fuels according to customer specifications, resulting in finished fuel products at the Sisaket Depot location.

The Company offers a resource sharing service to major oil traders, providing services for the receipt, storage, blending, and distribution of fuel to gas stations. The Company acts as a fuel reserve and supply for nearby gas stations, allowing oil traders to reduce their construction costs for oil depots. This service also facilitates and expands transportation options, including fuel reserve for gas stations, making it an efficient way to manage resources in Thailand's energy supply chain. The service provided by the Company includes the following features:

Business Type

3114

Business Groups

Business GroupDescription
Services of receiving, storing, and distributing finished fuel

1. Characteristics of Products and Services

The origin of the oil supply chain begins at oil refineries, which are primarily located in the eastern region of Thailand. As a result, oil traders must purchase oil from refineries and devise ways to distribute it to customers in various regions across the country. Establishing fuel depots in strategic locations improves the distribution efficiency for oil traders and also reduces the need for gas stations to maintain large oil reserves, as they can acquire oil from the Company's depots instead.


In order to achieve the goal of becoming a fuel distribution point that improves the operations of both oil traders and gas stations, the Company has conducted research on oil transportation routes and demand levels in various regions to determine the most suitable locations for setting up fuel depots to offer services for receiving, storing, and distributing finished fuel to oil traders. The company has also established a system that guarantees customer trust in the safety and efficiency of its services. To ensure accuracy in the receipt and dispensing of fuel, the Company has implemented an automatic depot management system (Terminal Automation System: TAS). This system prevents errors in fuel types and ensures that the correct fuel is received and dispensed. Additionally, the storage of customers' oil in the Company's tanks is controlled by an Automatic Tank Gauging ( ATG) system which allows for real-time monitoring of fuel levels and collection of important statistical data on oil intake and outtake volume.


Furthermore, the Company has organized its employees to monitor fuel reception, dispensing, and in-tank fuel levels in a control room (CCR: Command Center Room) to keep track of storage operations. These employees are responsible for ensuring the proper functioning of each system and maintaining safety protocols. The company has also implemented a fire extinguishment system using chemicals and water around the storage area to ensure that customers and personnel receive a convenient, fast and safe service when using the fuel storage service of the Company.


In order to provide daily services, the Company calculates the amount of oil that can be received from trucks for storage and the amount of oil that can be supplied to trucks. This is to plan the appropriate amount of fuel receipt from traders, prepare the distribution of fuel to gas stations from the Company's depots, and create reports on oil receipt and supply results, as well as the remaining oil for customers. Also, the company constantly assesses the quality and attributes of the oil received and stored in the depots to ensure that the attributes of the oil supplied are the same as when received. Additionally, to minimize oil loss and protect the environment, the Company has implemented a fuel evaporation prevention system using an internal floating roof system, which reduces the amount of fuel evaporated into the environment. Also, the company has established operating procedures to inspect the quality of trucks and driver readiness to ensure safety and efficiency in managing the supply chain for customers.


Currently, the Company operates two finished fuel depots, located in Khon Kaen Province and Sisaket Province, providing services for the receipt, storage, and dispensing of fuel. The Company has ensured ample space at each depot for safe and efficient operations. This includes a parking area for oil tank trucks, reception and dispensing ports controlled by the Terminal Automation System (TAS), controlled oil tanks that are constantly monitored and assessed for quality, and an office building that serves as both an office and control center for various operations within the depot. The details of the two depots are as follows:"

1.1 The fuel depot in Khon Kaen Province ("Khon Kaen Depot") is located in the Nam Pong District, covering an area of 37 rai. The depot began operations in 2014, primarily serving investors in the upper northeastern region. The Khon Kaen Depot currently has 10 oil tanks with a total capacity of 9.0 million liters (based on the tank specifications in the fuel depot operating license). The depot is capable of accommodating several types of fuel to meet the demands in Thailand, including automotive diesel oil, gasohol 91, gasohol 95, gasohol E20, gasohol E85, and B10 diesel.

The Khon Kaen Depot features 8 fuel reception ports and 8 fuel dispensing ports, equipped with 19 loading arms. The depot has the capacity to receive and dispense up to 1,400 million liters of oil per year, or equivalent to dispensing oil to 296 oil tank trucks per day with an oil tank truck capacity of 16,000 liters.

1.2 The fuel depot in Sisaket Province ("Sisaket Depot") is located on the Sisaket-Ubon Ratchathani Road in the Kanthararom District, covering an area of 74 rai. The depot began operations in 2019, primarily serving investors in the lower northeastern region. The Sisaket Depot currently has 10 oil tanks with a total capacity of 9.70 million liters (based on the tank specifications in the fuel depot operating license). The depot is capable of storing finished fuel, base fuel and several types of bio-fuel including base diesel, base gasoline, ethanol, biodiesel (B100) and premium diesel.

In Sisaket Depot’s area, there are 6 fuel reception ports and 4 fuel dispensing ports, with 12 loading arms. The depot is capable of receiving and dispensing up to 830 million liters of oil and 770 million liters respectively per year, or calculated as dispensing fuel to 152 oil tank trucks/day for an oil tank truck with a capacity of 16,000 liters.


2. Fuel Blending Service

As the fuel from different oil traders have varying components, it is not possible to store the same fuel type from each trader in the same tank. In order to accommodate more than one customer, more tanks must be built to match the increasing customers and their required types of fuel, resulting in additional investment in building and utilizing more space. In order to address this, the Company has expanded its business to include fuel blending services, which are available in two ways as follows:

1) Batch Blending is a process where the materials of base fuel, biofuel, and additives are blended together in a tank to create a mixture, which is then stored until it is dispensed.

2) Inline Blending is a process where the materials of base fuel, biofuel, and additives are blended together through a supply pipe that has an installed mixing spiral (Static Mixer) and the blending process is done through the mixture flow, making it instantly ready for dispensing. The advantage of inline blending is that the system can blend and dispense fuel at the desired amount, eliminating the need for blending tanks and stored oil. Additionally, instant mixing takes less time than mixing fuel in a blending tank, and can adapt to changes in oil distribution formulas and support an increase in fuel product types, as well as quickly accommodate changes in customers' fuel distribution plans.


The Company has chosen to use inline blending to blend fuel by formula to meet the customers' desired product. By doing this, the Company has built only 5 tanks for storing the main components such as base gasoline type 1, base gasoline type 2, base diesel, ethanol, and biodiesel. These can be mixed with additives according to the customers' required formula to produce more than 8 types of finished fuel products such as gasohol 91, gasohol 95, gasohol E20, gasohol E85, diesel B5, diesel B7, diesel B10, diesel B20, etc. Inline blending not only helps reduce the cost of building new tanks but also provides flexibility in adapting to formula changes, allowing the Company to supply a wider range of fuel types. It is also more cost-efficient in providing certain fuel types that have lower profit margins, making it less viable to invest in building new tanks.


Summary of Fuel Currently Being Blended by the Company

1. Gasoline group: It is a finished fuel product created by blending ethanol and ethyl alcohol from domestic sources such as cane and cassava with gasoline fuel and additives to produce fuel for gasoline engines. The ethanol used in blending has a purity of 99.5 percent. The additives are used to increase the octane value, enhance corrosion resistance, lubricate engines, etc. The Company currently offers blending services for 4 types of gasoline as follows:

2. Diesel group: It is a finished fuel product created by blending base diesel and biodiesel (B100) which is a biofuel derived from natural oils of plants or animals. This helps to conserve the environment and save energy. The Company currently offers blending services for biodiesel in standard proportions as follows:



3. Diesel group: It is a finished fuel product created by blending base diesel and biodiesel (B100) which is a biofuel derived from natural oils of plants or animals. This helps to conserve the environment and save energy. The Company currently offers blending services for biodiesel in standard proportions as follows:

Additionally, the Company can blend other biodiesel formulas in desired proportions as requested by customers, such as diesel B5. The proportion of biodiesel in diesel fuel may vary based on announcements by the Ministry of Energy. The Company is also able to add additives to increase the fuel efficiency according to the oil traders' formula, similar to the gasoline group.


Research & Development

Has R&D Policy (Y/N)

No

R&D Cost — Description

None

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

0.0

R&D Cost — Last Year

0

R&D Cost — 2 Years Ago

0.0

Assets Used in the Business

Permanent Assets — Description

As of December 31, 2025, the Company had the main assets used in its business operations, including land, buildings, equipment, and investment properties, all of which had a total net book value of 465.67 million baht as follows :

Permanent Assets — Appraisal

AssetOwnershipObligationAppraisal ValueDescription
LandsOwnedNone104.37
- Khon Kaen Oil Depot Land 37 Rai 12 square wah. Location No. 111 Moo 10, Kut Nam Sai Subdistrict, Nam Phong District, Khon Kaen Province 40310 -- Sisaket Oil Depot Land 74 rai, 5 ngan, 78 square wah. Location: 111 Moo 5, Nong Bua Subdistrict, Kantrarom District, Sisaket Province 33130
Buildings and building improvementsOwnedNone103.33
Oil depotsOwnedNone191.47
Decorations and EquipmentOwnedNone14.45
VehiclesOwnedNone0.76
Computer and SoftwareOwnedNone2.7
Investment propertiesOwnedNone39.44
- Khon Kaen Oil Depot Land 26 Rai 71 square wah. Location No. 111 Moo 10, Kut Nam Sai Subdistrict, Nam Phong District, Khon Kaen Province 40310 -- Sisaket Oil Depot Land 45 rai, 2 ngan, 4 square wah. Location: 111 Moo 5, Nong Bua Subdistrict, Kantrarom District, Sisaket Province 33130
Water supply system and construction-in-progress of prototype OwnedNone9.15

Intangible Assets — Description

Software used for recording operational data and efficiently managing company tasks.

Has Subsidiaries Investment Policy (Y/N)

Yes

Subsidiaries Investment Policy — Description

Premier Tank Corporation Public Company Limited “Company” has a policy to supervise the operations of subsidiaries and associated companies. It, therefore, requires that the nomination and exercise of voting rights in the appointment of persons as directors in subsidiaries and associated companies must first be approved by the Board of Directors. The persons appointed as directors for subsidiaries and associated companies are responsible for acting in the best interests of such subsidiary or associates (not in the best interests of the Company). The Company requires that such appointed persons must be approved by the Board of Directors before voting or exercising voting rights on important matters of subsidiary and associated companies, which are of the same level of importance as if they are carried out by the Company itself which must be approved by the Board of Directors. The submission of representatives to be directors in such subsidiaries and associates shall be in accordance with the proportion of the Company's shareholding and/or agreements between shareholders in such subsidiaries and associates.

In addition, in the case of a subsidiary, the Company requires that the persons appointed by the Company must supervise the subsidiary's operations in related transactions, the acquisition or disposition of assets, or other important transactions of such subsidiaries to be completed and accurate in accordance with the regulations of the Office of the Securities and Exchange Commission and/or the Stock Exchange of Thailand. He/She must apply the regulations relating to the disclosure of the above information and transactions in the same manner as the Company's regulations, including ensuring that the data and accounting records of the subsidiaries are collected and recorded so that the Company can audit and collect to prepare the consolidated financial statements in time as prescribed by the Stock Exchange of Thailand.

Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

(2) Marketing and Competition

a) Competitive Strategies.

The Company’s competitive strategies can be summarized as follows:

1. Building a Service Base in a Prime Location (Asset & Location Excellence)

Thanks to their background in the business management of gas stations and fuel transportation vehicles, the Company's executives have a good understanding of the oil trader's supply chain management in Thailand and can determine the location in the construction of the depot to be a strategic point in fuel distribution for traders to gas stations and users, by considering from several factors including the demand for fuel consumption in each area, the amount of existing oil supply, transportation cost for transporting fuel to gas stations, the convenience of location to receive - supply fuel and connection and addition of alternatives in customer’s supply chain management for maximum benefit. The Company’s first depot located in Nam Pong District, Khon Kaen Province, has an objective to distribute fuel oil to gas stations located in the upper northeastern region which covers the area of Bueng Kan, Nong Khai, Nakhon Phanom, Udon Thani, Sakon Nakhon, Nong Bua Lamphu, Loei, Khon Kaen, Kalasin, Roi Et, and Maha Sarakham Provinces. The 2nd depot located in Kanthararom District, Sisaket Province, has an objective to distribute fuel oil to gas stations located in the lower northeastern region which covers the area of Sisaket, Surin, Ubon Ratchathani, Roi Et, Amnat Charoen, Yasothon, and Mukdahan Provinces.

Choosing a good depot location will help oil traders to distribute fuel to their Gas Stations conveniently and quickly, as well as help the Gas Stations to plan their fuel stock levels efficiently with less time consumed which increases the cost of entrepreneurs. Therefore, having the location of the depot which values the convenience of access to the service station is one of the factors that help motivate operators to become interested to join a gas station under each oil trader. This is considered the enhancement of the competitiveness of such oil traders.

2. Building Operational Excellence

The Company prioritizes the service quality for its customers, starting from designing and selecting the standardized equipment. It has trained relevant personnel to be able to strictly follow the work procedures, determined the policy to control the processes of receiving, storing, blending, and dispensing with standards, modernism, and safety by designing a fuel reception system that prevents receiving the wrong fuel type, collected fuel samples for analysis on a regular basis, and checked the amount of oil with instruments and an automatic system. The Company also prioritizes reducing the loss amount from fuel evaporation in the operations (Operational Loss) by installing fuel storage tanks on an internal floating roof (IRF) for gasoline which can effectively reduce and effectively prevent fuel evaporation as well as be able to keep the fuel loss amount lower than the customers’ agreed criteria. Moreover, the Company prioritizes safety by designing and installing fire extinguishment systems around the fuel depot, static electricity protection at fuel receiving and dispensing ports, extinguisher pipes and foam buckets (Alcohol Resistant - Aqueous Film Forming Foam AR-AFFF) which are resistant to alcohol and form a protective film that prevents oxygen in order to prevent fire arising from oil nearby the oil pipeline in the depot, CCTV cameras against potential theft, corruption, and fire accidents, including an alarm system when an abnormality occurs as well as organizing personnel to observe CCTV cameras in order to build confidence for both service users and employees.

With this respect, the Company has been certified for its qualified management and operation by International Organization for Standardization (ISO). The Company's Khon Kaen Depot certified standards can be summarized as follows:



3. Building Service excellence

Service is the heart of the Company's business. The Company adheres to customer satisfaction as a crucial factor in evaluating the success of the operation. The Company will continuously listen to the customers’ needs and opinions to improve the creation of new services or processes to develop a growth plan with oil traders as a distribution point to end users. The Company has surveyed the type and quantity of fuel required by Gas Stations. It was found that some types of finished fuel were not consumed much, such as premium diesel, making it not worth the investment to build fuel storage tanks to accommodate. Therefore, the Sisaket Depot has been designed to blend the fuel according to the oil traders’ required blending formula, allowing the Company to accommodate the lesser consumed fuel types without the need to stock or prior planning for the distribution of such fuel. Besides, the Company is able to blend fuel that customers’ desire in different formula quickly, if there is a change, because the Company has opted for the inline blending system which increases the blending efficiency. In addition, the Company is also able to do marketing with oil traders to promote public relations for various Gas Stations to receive the fuel containing biofuels which are ethanol and biodiesel at the Company's depots. This promotes the price of agricultural products and helps reduce PM2.5 particles with completely combusted properties of oil.

In addition to prioritizing the needs of customers, the Company also regards all related parties by designing procedures and services for receiving and distributing fuel with modern technology to manage the queue schedule for depot transfer vehicles and fuel distribution, which is fast and facilitates the use of services resulting in the increased efficiency under appropriate cost. Resting spots are also provided for gas station drivers to rest while waiting in line for receiving or distributing fuel to facilitate the use of the Company's depot service.

4. Building Technological excellence

The Company has implemented TAS (Terminal Automation System), which is the fuel receiving and supplying control system including checking the status of receiving and distributing fuel at any location and the quantity at a given time. As a result, the system can prevent mistakes in the work and view the information at any time of the fuel in the depot immediately. The Company's fuel receiving and dispensing systems use fingerprints to identify drivers and RFID for tankers to ensure that the correct type of fuel is received into the tank. In addition, the Company has installed an ATG (Automatic Tank Gauging) system that can measure the fuel level, the average temperature of fuel, and the amount of fuel in the tank automatically. This makes it possible to immediately verify the amount of fuel in the storage tank. Therefore, the Company can manage the resources within the depot precisely and efficiently.

5. Building People Excellence

Personnel from direct and indirect operations have expertise in their respective areas of responsibility. The Company has the policy to train and develop quality personnel continuously to support business situations that may change in the future. In addition, the Company has a job rotation policy and responsibilities so that personnel can work in many positions to increase their ability and enable them to collaborate interchangeably with each other when necessary.

The Company focuses on cultivating personnel to adhere to the values of organization in the same direction, teamwork, and creating good works with constant development by following the standard rules of operation process and responding to the changes as well as the needs of future customers with care for customers, related persons, society, and environment.


(b) Characteristics of Customers and Target Customer Groups

The Company divides the Company's customers into2 groups as follows:

1. Major oil traders in Section 7 (the oil traders with trading volume of each type of oil or a combination of all kinds per year from 100,000 metric tons or more according to the Fuel Trade Act B.E. 2543) or “direct customers” who use the service of the company's depot as a fuel distribution point for oil users. Most of the major oil traders in Section 7 will refine or store oil at refineries in the east or depots in the central region. Gas Stations under each oil trader must travel to the locations or oil distribution points to receive fuel for sale to oil users which causes time to travel, transportation costs, and accident risk. Therefore, having a fuel distribution point that is convenient for receiving fuel for the Gas Stations is one of the factors in the decision of entrepreneurs to choose a fuel trader's affiliation. Having a large number of affiliated Gas Stations will increase the competitiveness of oil traders because there are more distribution channels for oil users. Therefore, the Company built a depot to serve as a strategic point for oil distribution to oil traders and to build confidence in this group of customers by designing and selecting good quality and modern oil depot equipment, as well as ensuring the storage of fuel for customers with a fast, safe and efficient process. This is to ensure that the oil distributed to oil users will be of the same quality as received. Contacting customers in this group will be under the supervision of the Chief Executive Officer or higher because there are only a few major oil traders in Thailand. The Company will contact to present services, rates, and various conditions in providing services directly to customers.

2. Gas Stations or “indirect customers” pick up fuel to sell to various users in the energy supply chain. Most of the Gas Stations will choose the points to receive fuel from the traders under Section 7. Therefore, the Company must give priority to providing services and preparing sufficient fuel for service on a regular basis so that the Gas Stations are satisfied in choosing to receive fuel from the Company's depots. The Company has established working procedures within the depots to ensure that Gas Stations receive service in an orderly and prompt manner. Standards for receiving and distributing fuel have been set to ensure that oil users receive the correct amount and type of fuel. A rest area during waiting is also arranged so that service users are ready to continue driving. Contacting customers in the Gas Stations group will be under the responsibility of the Marketing and Business Development divisions. The employees will contact the target Gas Stations to present the quality of the Company's services, such as an information card identification system and fuel queuing system that are easy and convenient to use, a resting spot for drivers while waiting for fuel, check of driver readiness and initial safety condition of the vehicle. The Company also ensures that the Company's fuel dispensing amount is equal to the amount users have ordered from oil traders.

Service Rates for Receiving, Storing, Blending and Dispensing Fuel


(c) Distribution and Distribution Channels

Information of distribution and distribution channels appears in Section “Characteristics of Customers and Target Groups” and Section “Raw Material Procurement.”

Industry & Competition (Overall)

(d) Industry Outlook and Competition

The Company is authorized to operate as a fuel depot operator under Section 17 of the Fuel Control Act B.E.2542 (“Operator of Controlled Business Type 3”) by the Department of Energy Business, Ministry of Energy. This authorization allows the Company to operate a depot service for receiving and dispensing finished fuel products. At present, the Company has an agreement to be a depot service provider for receiving, storing, and distributing finished fuel for PTT Oil and Retail Business Public Company Limited. The current service area is in the Northeastern region, which is the region with the 3rd largest proportion of gasoline and diesel sales in Thailand after the central region and the Bangkok metropolitan region. The northeastern region is a region with potential and continuous development, both in the agricultural industry and tourism. It is also a route that connects to neighboring countries, causing the demand for oil to increase steadily.

In conducting business, the Company focuses on building strategic alliances by working together (Synergistic Strategic Alliance) with both customers, partners, including entrepreneurs in the same business, with the aim of doing business to grow together by sharing knowledge and skills, separating and managing risks of organization, and innovations from its partners to achieve the main goal of linking the most efficient and quality energy transport system.

Currently, major oil traders in Thailand have 52 fuel depots which are mostly concentrated in the eastern, central, and outer regions of Bangkok. There are 22 in the central, 6 in the north, 11 in the south, 6 in the east, and 7 in the northeast which consist of PTC depot in Khon Kaen, PTC depot in Sisaket, PTT depot in Ubon Ratchathani, PTG Energy depot in Khon Kaen, PTG Energy depot in Nakhon Ratchasima, PTG Energy depot in Surin, and TPN depot in Khon Kaen. Therefore, the depot that is regarded as the Company's competitor in alternative fuel receiving points for PTT Gas Stations is the PTT depot in Ubon Ratchathani. And, there TPN oil depot in Ban Phai District, Khon Kaen, which mainly receives oil from the oil pipeline system.

Having 1 additional fuel depot, which is a depot of the pipeline transportation system, is an additional option for oil traders to supply chain management services. The methods of transportation can be chosen both by car, railways, and pipelines, resulting in more flexibility in management. However, having an additional fuel depot affects Gas Stations to have more options to receive fuel. As a result, it may affect the Company to lose some customers who are Gas Stations, especially the group of stations located close to the new depot.

The Company has the plan to market to seek new customers as a group of Gas Stations that have never used the service to pick up fuel from the Company's depots or come in to pick up in small quantities to reduce the impact of losing customers and create growth for the Company in the future.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)


Product and Service Procurement


Supply Goods and Service Raw Material Procurement

Procurement of Finished Fuel and Mixtures for Blending the Finished Fuel The oil trader supplies the Company with finished fuels and mixtures for blending the finished fuel. The Company provides services of receiving fuel to prepare for blending according to the formula and dispensing to oil users. Therefore, the refined fuel and mixtures for blending the finished fuel are not the Company's property. However, the Company will be affected if oil traders cannot supply the Company with enough finished fuels and mixtures for blending the finished fuel. Therefore, to reduce such risk, the Company has coordinated with oil traders to plan the delivery of sufficient finished fuels and mixtures for blending the finished fuel to meet the demand.

Raw Material Acquisition (Overall)

Procurement of Fuel Storage Tanks and Equipment for Fuel Receiving and Dispensing Pumps

The main components in the fuel depot business are 2 parts:

1) Fuel tank for fuel storage, Pumps for receiving and dispensing fuel: The Company hired a construction contractor for the construction of fuel tanks from a construction company in Thailand, and hired to assemble and install pumps for receiving and distributing fuel, including fuel pipelines, from a design and engineering consulting company in Thailand.

2) Terminal Automation System: TAS The Company hired a design and engineering consultancy company in Thailand that specializes in TAS system to install and set the system. To select the contractor/installer of the fuel dispensing equipment, the Company has a selection process as follows:

• Preparation of terms of employment: The Business Development department will gather information about the specifications of the required fuel tanks and fuel dispensing equipment, and deliver them to the purchasing department for consideration and comparison of specifications and prices.

• In comparison of features and prices of the seller, the Company's purchasing department will assess the vendors in the Approved Vendor List using the evaluation criteria from the supplier selection and evaluation practices to select products and services that meet the quality standards and requirements of work materials at reasonable costs.

• Approval to enter into a contract: It can only be done when the authorized person signs an approval and sends the documents to the procurement officer for further procurement.

Procurement of Replacement Parts and Equipment

The Company has clearly defined guidelines for controlling and registering parts and equipment. There is a reserve of essential replacement parts and equipment for depot operations in case of any failures, so the Company can change spare parts to continue its operations smoothly. In addition, there is a minimum amount needed for reservation of some items of equipment in order to be able to use continuously and not affect the service, such as equipment required for maintenance of the fuel receiving/dispensing system, including materials that are used frequently or take a long time to purchase or have high transportation costs, etc., The Company also prepares its monthly receipt-payment reports and monthly checks in order to have sufficient equipment for maintenance.

Maintenance Plan

The Company has a maintenance plan with materials, spare parts, and equipment separately for each type of machine. There are a budget for maintenance, a follow-up on the performance of maintenance operations to review whether it is in accordance with the annual work plan, and a report on actual expenses compared to the budget which is reported to the management division.

Service Procedures

The Company provides receiving, storing, blending, and dispensing fuel services to users. The process details of receiving and dispensing fuel are as follows:

Fuel Receiving Procedures

1. The Company informs the remaining amount of oil to oil traders, coordinates with oil traders to plan for delivering fuel to the depot to have enough fuel to give to stations regularly, and gives vehicle registration information, type, and amount of fuel that the tank trucks will deliver in the morning before opening the depot. This is to verify whether the oil was delivered as required by the Company asked or not. When the carrier arrives at the depot, the Company fundamentally inspects the condition of the vehicle and the invoice of transportation.

2. The carrier brings the transportation invoice to the ticket office staff to verify that the driver, car, and fuel vehicle match what has been notified or not and get a quality and quantity inspection queue.

3. The driver brings the truck to the checkpoint for the officer to inspect the quality and quantity of fuel.

4. The driver connects the fuel pump pipe and then taps the vehicle identification card to confirm the type of fuel to be pumped into the tank. Then, the driver shall press the button to open the pump to pump oil into the tank under the control of the TAS system (the Company's automatic fuel receiving-dispensing control system).

5. When finished pumping oil, the driver picks up a copy of the invoice and takes the car out of the depot


Fuel Dispensing Procedures

1. The fuel tank truck from Gas Stations come to receive fuel as ordered and choose to receive fuel at the Company's depot.

2. The Company fundamentally inspects the condition of the vehicle according to the security measures of the depot.

3. The driver contacted the ticket office staff to receive fuel. The Company will designate fuel distribution channels according to the types and quantities of customers' orders.

4. The Company’s employees inspect the vehicle condition, check the cleanliness of the containers, and seal the dispensing pipe.

5. The driver brings the truck to the parking lot at the number specified in the filling instruction sheet.

6. The driver puts the fuel loading arm into the receiving compartment of the fuel tank truck.

7. The driver taps the vehicle's identification card to allow the TAS system to confirm the receipt of fuel, which allows the meter to dispense the specified type and quantity of fuel.

8. The driver puts the loading arm back and takes the truck to the Company’s employees to seal the fuel tank cap.

9. The driver receives the fuel documents at the office and drives off.


Stock Count and Receipt Confirmation

The Company has 2 types of fuel measurements in fuel tanks:

1. Automatic Tank Gauging(ATG ) which will count continuously

2. Measured by dropping an oil tape measure vertically 2times a day, before and after closing the depot, to verify the measured value from the ATG system.


Production department personnel is a person with the following qualifications:


1. High vocational certificate or higher

2. At least 1-year professional experience

3. Good problem-solving skill

4. Pump and valve maintenance skills are preferable.

5. Pipeline or pipeline’s inner pressure knowledge is preferable.

6. Able to work in shifts. Able to work on holidays.

7. Passed the health checkup according to the scope as follows:

• General physical examination by a doctor (PE)

• Drug test (Amphetamine)

• X-ray examination with large film (CXR)

• Short and long-sightedness and color blindness test and Toluene

• Detection of benzene in urine, analysis of metabolite in urine (S-Phenyl mercapturic Acid or T-Muonic Acid)

• Hepatitis B virus (HBsAg) examination

• Complete blood count (CBC)

• Fasting Blood Sugar (FBS)

• Hearing performance examination

8. Black-List examination before starting work

8.1 The Black-List examination must be done before informing employees to start work.

8.2 Criteria for Black-List consideration are as follows:

• Collaborated with the Company and/or the employer and have behaviors that are against the Company's work ethics while working.

8.3 If an applicant is on the Blacklist, consideration will depend on the decision of the executives and/or supervisors involved.

Service Procedures

Service Procedures Information is in Section “Raw Material Procurement."

Environmental Impact

In business operations, the prevention system of fuel evaporation affecting the atmosphere is implemented by using an internal floating roof system to reduce the rate of fuel evaporation. The amount of air pollutants released into the outside environment is under the law. For waste from services such as oil sludge and oil-contaminated material, the Company has hired an external company to properly treat and dispose of, with a license as required by law. However, because of the nature of the business involving in the flammable materials storage, the Company has to comply with various safety rules and regulations by relevant regulatory agencies such as the Department of Energy Business, Department of Industrial Works, to strictly prevent hazards that may occur to health and the environment. At the moment, the Company has no dispute in relation to the environment.

Environmental Disputes or Litigation and Guidelines for Resolving such Disputes

On December 31, 2024, the Company has no legal disputes that may negatively affect the Company's assets of higher than 5% of the shareholders' equity.

Production Policy (Overall)

Production Policy and Capacity

The Khon Kaen Depot has 8 fuel reception ports and 8 fuel dispensing ports, with 19 loading arms. The depot is capable of receiving and dispensing up to 1,400 million liters of oil and 1,400 million liters respectively per year, or calculated as dispensing oil to 296 oil tank trucks/day for an oil tank truck with a capacity of 16,000 liters.

The Sisaket Depot has 6 fuel reception ports and 4 fuel dispensing ports, with 12 loading arms. The depot is capable of receiving and dispensing up to 830 million liters of oil and 770 million liters respectively per year, or calculated as dispensing fuel to 152 oil tank trucks/day for an oil tank truck with a capacity of 16,000 liters.

Production Capacity (Overall)

ItemUnitUnit (if Other)UsedCapacity
SisaketOthersMillion liters16.61770
Khon KaenOthersMillion liters46.131,400

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
Services of receiving, storing, and distributing finished fuelThailand0

Nature of Business — Overview

Introduction

Premier Tank Corporation Public Company Limited (“Company”) is authorized to operate as an oil depot operator under Section 17 of the Fuel Oil Control Act B.E. 2542 (“Operator of Controlling Business Type 3”) by the Department of Energy Business and Ministry of Energy. This authorization allows the company to conduct fuel depot business operations such as receiving, storing, blending and dispensing fuel products. The operations include:

1) Services for receiving, storing, and dispensing finished fuel products such as gasoline and diesel provided at the fuel depots in Khon Kaen Province (“Khon Kaen Depot”) and Sisaket Province (“Sisaket Depot”).

2) We offer a service that blending basic fuels to create finished fuel products as per our customer's requirements, at our fuel depot located in Sisaket Province.

Subsidiary Company is Hydro Genius Company Limited, Operate as a Produce, procure, and sell tap water filtration systems for household consumption.

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents